A Pipe Leak That Ran Through the Walls: Melbourne Water Damage Restoration, Before and After

Wall opened to the framing after a pipe leak in a Melbourne home, with a moisture meter on the studs

Contents

A pipe leak inside the walls of this Melbourne home did its damage quietly. By the time we were called, the water had reached more than one room, and the only honest fix was taking the drywall down to the studs and drying what was behind it.

Growth along the bottom of a wall after the baseboard came off in a Melbourne home
Before: the first baseboard came off, and this is what was behind it.

What we found

The thermal camera and the moisture meters told the story before anything was opened. The readings ran high along the bottom of the walls in several rooms, down the hallway and into the kitchen. When the baseboards came off, the drywall behind them was wet and there was dark growth along the bottom edge of the wall. The hallway flooring was wet underneath too, so it came up.

Why a pipe leak does this much damage

A water line that leaks inside a wall does not make a puddle. The water runs down the inside of the wall and across the slab, and the drywall and baseboards wick it up. It can go on for weeks before anything shows on the surface. Drywall that has been wet that long does not dry out on its own, and growth starts on the back side where nobody can see it. That is why wet material comes out instead of being left in place and painted over.

Containment plastic and an air mover at an opened wall during water damage drying in Melbourne
During: containment plastic up, the wall opened, and an air mover running on the framing.

What we did

  • Mapped the moisture with a thermal camera and pin meters, so we knew exactly which walls and floors were affected
  • Put up containment and ran an air scrubber, so dust and spores stayed in the work area
  • Removed the baseboards, the wet drywall down to the studs, and the wet hallway flooring
  • Opened the kitchen walls to the framing where the readings ran high
  • Set air movers and dehumidifiers and checked every wall with the meter until it read dry
  • Left the job site clean at the end of every day, which the homeowner made a point of mentioning
Hallway with the flooring removed and drying equipment running in a Melbourne home
During: the hallway flooring out and the drying equipment running on the slab.
Kitchen opened down to the studs, clean and dry, after water damage mitigation in Melbourne
After: the kitchen opened to the studs, clean and dry, ready for the rebuild.

A tip for Melbourne homeowners

If a baseboard swells, pulls away from the wall, or the paint just above it bubbles, water is getting behind it. Do not caulk it or paint over it. Have the wall checked with a meter first. Finding a pipe leak early is the difference between replacing a few feet of drywall and opening up half the house.

Questions we get on jobs like this

Why take the drywall all the way down to the studs? Because the framing and the bottom plate are where the water sits. If the wall is only opened a foot up and the plate is still wet, the new drywall goes on over a wet wall and the problem comes back.

Do you fix the pipe? No. A plumber repairs the line. We find how far the water went, remove what is wet, and dry the structure so the rebuild goes onto a dry, clean wall.

Swollen baseboards or a musty smell in Melbourne?

Call or text (321) 890-2512, Monday to Friday, 8 to 5. The moisture evaluation is free. We handle water damage restoration in Melbourne and all of Brevard County, and we are IICRC certified.

Recent Posts

☎ Call (321) 890‑2512 💬 Text us
Mon–Fri 8–5 · free moisture evaluation · all of Brevard County