
Contents
The air handler closet in this Rockledge home looked fine from the hallway. Behind the return, the AC drain line had been leaking for a long time, and the water had worked through the wall and the baseboards where nobody could see it.

What we found
On the first visit, the moisture meter and the thermal camera showed wet drywall around the HVAC closet. The source was a failed condensate drain line underneath the return plenum, the box the air handler pulls air through. A leak there drips into the wall and the slab instead of onto the floor where you would notice it.
We set up to start drying, but the homeowner asked us to pause while their insurance coverage was confirmed. That is a fair request, and we understand it. It did cost time. By the time we came back, the water had gone from a clean leak to a Category 3 loss, with active mold growth on the drywall and the baseboards.
Why it got worse while it waited
Wet drywall in Brevard County humidity does not stay clean for long. Within a couple of days, growth can start on the paper facing, and water that has been sitting in building materials that long is treated as contaminated. At that point drying in place is off the table. Whatever it soaked into has to come out.

What we did
- Put up plastic containment around the closet with an air scrubber running, so nothing moved into the rest of the house
- Removed the contaminated drywall, baseboards and insulation from around the HVAC closet
- Cleaned and treated the framing and the platform the air handler sits on
- Dried the structure and checked it with the meter before calling it done
- Left the closet clean and ready for the homeowner’s rebuild contractor


A tip for Rockledge homeowners
Open your air handler closet once a month and look at the pan and the floor around it. If the drywall near the return feels soft, or there is a musty smell when the AC runs, have it looked at. And if you are waiting on insurance, call us anyway. We document the loss for your claim while the drying starts, which is cheaper for everyone than a mold job later.
Questions we get on jobs like this
What does Category 3 water mean? It is water that has been sitting long enough, or came from a dirty enough source, that it is considered contaminated. Materials it soaked into come out rather than get dried in place.
Do you rebuild the closet afterward? No. We handle the water and mold side and leave it clean and dry for your contractor. We are glad to recommend one.
Musty smell near your AC in Rockledge?
Call or text (321) 890-2512, Monday to Friday, 8 to 5. The mold inspection is free. We handle mold remediation in Rockledge and water damage anywhere in Rockledge and the rest of Brevard County.
Recent Posts
Mold From a Failing AC: Titusville Humidity Mold Remediation, Before and After
No leak, no flood. A malfunctioning AC let the indoor humidity climb in this Titusville home until mold started growing. Here is the cleanup.
A Pipe Leak That Ran Through the Walls: Melbourne Water Damage Restoration, Before and After
A pipe leak inside the walls of a Melbourne home meant drywall down to the studs. Here is what was behind the baseboards, the drying setup and the clean result.
Storm Flooding in a Rockledge Office: Commercial Water Damage Cleanup, Before and After
Torrential rain pushed water into a Rockledge commercial building. Here is where it came in, how we dried it, and why we were back a few weeks later.